Door Reversal
1.Close the cabinet and remove the plug from the electrical socket.
2.Remove the ventilation grille. There is a part on the grille that can be removed. Reposition it and transfer to the opposite side.
3.Support the appliance on a wooden block when it is laid down. This will make it easier to grip under the appliance when returning to an upright position.
4.On the upper part of the appliance. Remove the hinge pin and replace on the other side.
5.On the lower part of the appliance. Unscrew the hinge. Move the hinge pin and plastic cover. Secure the hinge on the other side.
6.Raise the appliance and replace the ventilation grille.
7.Unscrew the handle. Carefully press in the plastic plugs on the opposite side using a punch. Secure the handle in the plug holes. Then press the supplied plastic plugs into the holes to which the handle was previously fitted.
8.Put the appliance in position. Check that it stands straight. See the section "Positioning the appliance".
1 |
2 |
3 |
4 |
8 |
Zanussi 818 20
13
