Zanussi ZL914W manual Hints and Tips, Measuring the temperature, Switching off, Cabinet interior

Models: ZL914W

1 16
Download 16 pages 44.11 Kb
Page 6
Image 6
Measuring the temperature

Measuring the temperature

If the temperature is measured using a standard, single thermometer, this should be put in a glass of water centrally placed inside the appliance. This will reflect the temperature inside the food products. Do not place the thermometer hanging or lying directly on the shelf.

·Distribute foodstuffs to allow cold air to circulate freely between the products.

·Do not place food products directly against the cooling plate on the rear wall as they may freeze here.

·Also never put warm products into the appliance. Wait until they have cooled down.

·Cover all foods properly to avoid odours and flavours from tainting other food.

Switching off

Set the thermostat control knob to the "0" position. Unplug the power supply plug from the wall socket.

Cabinet interior

The shelves and door compartments are removable and can easily be re-arranged.

Certain shelves must be lifted up by the rear edge to enable them to be removed.

The lower door compartment and the glass shelf above the salad drawer must not be moved. They are required for proper air circulation inside the cabinet. Shelves with a raised edge should be placed with the raised edge facing the rear wall of the cabinet, and thus prevent food products from touching the cooling plate.

Hints and Tips

Energy Saving Advice

·Do not install the cabinet close to sources of heat such as a cooker, dishwasher or radiator.

·Locate the appliance in a cool well ventilated room and make sure that the air openings of the cabinet are not obstructed.

·Always leave warm food to cool down to room temperature before placing in the fridge.

·Try to avoid keeping the door open for long periods, or opening the door too frequently as warm air will enter the cabinet, and cause the compressor to switch on unnecessarily often.

·Ensure there are no obstructions preventing the door from closing properly.

·It is advisable to periodically clean the

refrigeration system at the back of the appliance with a duster or vacuum cleaner.

·Always leave warm food to cool downn to room temperature before placing in the fridge.

·Make sure the door gasket is complete and always clean.

Zanussi 818 20 18-01/3

6

Page 6
Image 6
Zanussi ZL914W manual Hints and Tips, Measuring the temperature, Switching off, Cabinet interior, Energy Saving Advice