Initial Cleaning
•Remove all parts from the appliance.
•Clean the appliance before first use.
Caution! Do not use abrasive cleaning agents! This can damage the surface. Refer to chapter "Care and
Cleaning".
Setting the time
The oven only operates after time set.
When you connect the appliance to the electrical supply or in case of a power cut, the Time function indicator flashes automatically.
To set the current time use " + " or " - " button.
After approximately 5 seconds, the flashing stops and the display shows the time of day set.
For time change you must not set an automatic function (Duration 
or End 
) at the same time.
Preheating
Set 
and maximum temperature and run an empty oven for 45 minutes, to burn off any residue from the cavity surface. Accessories can become hotter than in normal use. During this period an odour can be emitted. This is normal. Make sure the room is well ventilated.
Daily use
Warning! Refer to "Safety information" chapter.
Switching the Oven On and Off
1.Turn the oven functions control knob to an oven function.
2.Turn the temperature control knob to a temperature. The power indicator comes on while the oven is in operation.
The temperature indicator comes on while the oven temperature increases.
3.To switch off the oven, turn the oven functions control knob and the temperature control knob to the Off po- sition.
Oven Functions
Oven function
OFF position
Oven lamp
Grill
Dual grill
Application
The appliance is OFF.
Lights up without any cooking function.
To grill flat food items in small quantities in the middle of the shelf. To make
toasts.
The full grill element is on. To grill flat food items in large quantities. To make
toasts.
5
