Door reversibility
Warning! Before carrying out any operations, remove the plug from the power socket.
A | B | B | C |
E | F | A |
|
C | D |
| D |
Important! To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations.
A 
2 
1
•Open the doors. Un- screw the middle hinge
(B). Remove the plastic spacer (A).
•Remove the spacer (F) and move to the other side of the hinge pivot
(E).
•Remove the doors.
•Remove the
•Fit the pin of the middle hinge (C) into the left- hand hole of the lower door.
•Unscrew the lower hinge
•Remove the
•
•Unscrew the lower hinge pivot (B) and the spacer
(C)and place them on the opposite side.
•Remove the plugs (1)on the upper side of both doors and move them to the other side.
•
•Insert the middle hinge into the left drill of the lower door.
•Unscrew the upper hinge pivot and place it on the opposite side.
•Fit the upper door on the upper door pivot.
•
•
Do a final check to make sure that:
•All screws are tightened.
•The edges of the doors run parallel to the side edge of the appliance.
•The magnetic seal adheres to the cabinet.
•The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the gas- ket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket.
Environmental concerns
In case you do not want to carry out the above mentioned operations, contact the nearest After Sales Service Force. The After Sales Service specialist will carry out the rever- sibility of the doors at your cost.
The symbol 
on the product or on its packaging indicates that this product may not be treated as
12
household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is
www.zanussi.com
