Control panel
12
5 4 3
1Temperature indicator LED
2Fast Freeze indicator
3Door sensor
4Fast Freeze button
5Temperature regulator
Switching on
Insert the plug into the wall socket.
Temperature regulation
To operate the appliance, proceed as follows:
•touch the temperature regulator button until the LED corresponding to the required temperature lights up. Selection is progressive, varying from 2 to 8°C.
At first button touch actual setting LED keeps blinking. Any time the button is touch the set temperature is moved to 1 position . Corresponding LED will blink for a while.
Touch the setting button until the required temperature is selected. The set will be fixed
coldest setting: +2°C warmest setting: +8°C
A medium setting is generally the most suitable.
However, the exact setting should be chosen keeping in mind that the temperature inside the appliance depends on:
•room temperature
•how often the door is opened
•quantity of food stored
•appliance location.
Fast Freezing function
You can activate the Fast Freezing function by pressing the Fast Freezing button.
The LED corresponding to the symbol Fast Freezing indi- cator lights up.
You can deactivate the Fast Freezing function by pressing the Fast Freezing button again.
The Fast Freezing indicator will light off.
Important!
This function stops automatically after 52 hours.
Door sensor
The appliance is equipped with an optical sensor to detect door open.
Do not put anything in front of the corresponding window, to maintain proper functioning.
First use
Cleaning the interior
Before using the appliance for the first time, wash the inte- rior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a
Important! Do not use detergents or abrasive powders, as these will damage the finish.
www.zanussi.com | 5 |
|