Zanussi ZU 8124 manual Description of the appliance, Electrical Connection, View of the appliance

Electrical Connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

1WARNING – THIS APPLIANCE MUST BE EARTHED

The manufacturer declines any liability should these safety measures not be obser- ved.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the left.

The appliance is supplied with a 13 amp plug fit- ted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.

Important

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow	Earth
Blue	Neutral
Brown	Live

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings indentifying the terminals in your plug, proceed as follows:

1.The wire coloured green and yellow must be connected to the terminal marked with the let- ter „E“ or by the earth symbol or coloured green and yellow.

2.The wire coloured blue must be connected to the terminal „N“ or coloured black.

3.The wire coloured brown must be connected to the terminal marked „L“ or coloured red.

4.Upon completion there must be not cut, or stray strands of wire present and the cord clamp must be secure over the outer sheat.

1 Warning! A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut-off plug is dis- posed of safely.

Green

& Yellow

Blue Brown

Cord Clamp

Description of the appliance

View of the appliance

➀ Temperature regulator and light switch

➁ Butter/cheese compartment

➂ Door storage compartment

➃ Bottle shelf

➄ Vegetable basket

➅ Storage racks

➆ Freezer compartment

➇ Rating plate

7