Prior to Initial Start–Up
0Please clean the appliance interior and all accessories prior to initial
Initial Use
Important! Only use the appliance when correctly installed!
0Plug the mains plug into the mains socket. When the door is opened the interior lighting comes on.
1Light switch
2Temperature regulator and ON/OFF switch
The temperature regulator is also the ON/OFF switch.
The large oval switch beside the temperature regulator is the light switch. When the door is opened and closed, the light switch switches the interior lighting on and off.
A coin is needed to turn the temperature regula- tor. This makes it is more difficult to change the temperature setting accidentally (child protec- tion).
The temperature regulator setting shown means: Refrigeration off. Turn in the direction of "1": Refrigeration on, the compressor starts
and then runs automatically.
Position "1" means:
Highest interior temperature (warmest setting)
This position means:
Lowest interior temperature (coldest setting)
The following effects are of significance in respect of the interior temperature:
–Ambient temperature;
–Quantity and temperature of the food stored;
–Frequency with which the door is opened and how long it is left open.
The following temperature settings can therefore only be considered as recommendations that may well need to be adapted to suit your particu- lar situation.
Recommended settings:
a)For normal refrigeration without using the freezer compartment:
–Position "1" to higher setting;
–If lower temperatures are required, mid position.
b)When frozen foods are stored in the freezer compartment or fresh food is to be frozen, a temperature setting of between mid and col- dest setting should be selected, depending on the ambient temperature.
Note: At the setting given under b) the fridge has an average temperature of approx. +5 °C; the average temperature in the freezer compart- ment is then approx.
At higher ambient temperatures, fresh food is properly frozen with the regulator set to a mid position, without the fridge becoming too cold.
0Turn the temperature regulator to the desi- red setting with the aid of a coin.
The compressor starts and then runs automati- cally.
Important!
High ambient temperatures (e.g. on hot summer days) and a cold setting on the temperature regulator can cause the compressor to run continuously.
8
