Sympton
Excessive build up of frost.
Solution
If the door seal is not airtight (probably after chan- ging over the door hinges) apply warm air to the non sealing area using a hair dryer set to a gentle heat. (do not use a fan heater for this purpose). This will make the rubber more supple and allow it to revert to its original shape.
Noise | Refer to Normal Operating Sounds | |
|
| |
The compressor does not start immediately after | This is normal, the compressor starts after a | |
changing the temperature setting. | period of time. | |
|
| |
Water on the floor | Water drain hole is blocked - see "Maintenance | |
and Cleaning". | ||
| ||
|
|
If after the above checks there is still a fault, call your local Service Force Centre.
Please note that proof of purchase is required for
Service and Spare Parts
In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi Service Force Centre by telephoning:
08705 929929
Your call be routed the Service force Centre covering your post code area. The address of your local Service Force Centre is detailed in the accompanying Customer Care Book.
Before calling out an engineer, please ensure you have read the details under the heading „Something not Working“
When you contact the Service Centre you will need to give the following details:
1.Your name, address and post code
2.Your telephone number
3.Clear and concise details of the fault
4.The model and serial number of the appliance (found on the rating plate)
5.The purchase date
Customer Care Department
For general enquiries concerning your Zanussi | Customer Care Department |
appliance or for further information on Zanussi | Zanussi |
products, you are invited to contact our Custo- | |
mer Care Department by letter or telephone as | Slough |
follows: | Berkshire |
| SL1 1DZ |
| Tel.: 08705 727727 |
13
