INSTALLATION

Important

IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE.

Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions under “Door reversal”.

Positioning

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification:

SN +10°C to + 32°C

N+16°C to + 32°C

ST +18°C to + 38°C

T+18°C to + 43°C

It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse, where the temperatures may fall below 10°C (50°F). If these temperatures are exceeded i.e. colder or warmer, then the appliance may not operate correctly.

You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be at least 100 mm (4”) distance between the top of the cabinet and any overhanging kitchen furniture (A). Ideally, the appliance should not be positioned beneath overhanging furniture (B).

There should also be a gap of 25 mm either side of the appliance. Do not obstruct the space underneath. The back of the cabinet may be placed close to the wall but must not touch it. DO NOT install in places with restricted ventilation.

Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers or a tool (see figure).

Rear spacers

In the bag with the documentation, there are two spacers which must be fitted as shown in the figure.

Slacken the screws and insert the spacer under the screw head, then re-tighten the screws.

Important

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

100 mm

 

A

B

10 mm

10 mm

NP006

 

D200

 

D594

13

Page 12 Page 14
Page 13
Image 13
Zanussi ZUF 2320 manual Installation, Positioning, Rear spacers
Page 12 Page 14

ZUF 2320 specifications

The Zanussi ZUF 2320 is a modern and efficient upright freezer designed to meet the storage needs of households while ensuring optimal performance and energy efficiency. This appliance stands out in the crowded market of freezers with its user-friendly features, innovative technologies, and reliable characteristics.

One of the main features of the Zanussi ZUF 2320 is its impressive storage capacity. With a spacious interior, this freezer offers flexible shelving options, allowing users to organize frozen foods of various sizes with ease. The adjustable shelves can accommodate taller items, maximizing the use of space while maintaining easy access to all stored goods.

Another notable characteristic of the ZUF 2320 is its Frost Free technology. This feature eliminates the need for manual defrosting, preventing ice buildup and ensuring that the freezer operates efficiently. By actively preventing frost accumulation, users can enjoy consistent temperatures and prevent freezer burn on their food.

Energy efficiency is a critical aspect of modern appliances, and Zanussi has designed the ZUF 2320 with an impressive energy rating. This ensures that the freezer not only saves users money on energy bills but also contributes to a more sustainable environment. The appliance uses advanced insulation to maintain optimal temperature performance while consuming minimal energy.

The Zanussi ZUF 2320 is also equipped with a fast freeze function that allows for quick freezing of fresh produce. This feature is particularly beneficial for users who wish to preserve the nutrients and quality of their food by freezing it as soon as possible. Additionally, the freezer includes a clear front drawer design, making it easy to identify contents without having to rummage through.

In terms of design, the Zanussi ZUF 2320 boasts a sleek and modern aesthetic, making it suitable for various kitchen styles. The intuitive control panel allows users to adjust settings effortlessly, ensuring a user-friendly experience.

Overall, the Zanussi ZUF 2320 combines practicality with advanced technology, making it an ideal choice for families and individuals looking for reliable freezing solutions. With its robust features, energy efficiency, and stylish design, this freezer stands out as a significant addition to any home.
Top Page Image Contents