RCA 26970 manual Installation

INSTALLATION

1.Make sure that the power supply cord is plugged into the POWER 12V DC jack on the base and into an AC outlet.

2.Plug the telephone line cord into the PHONE LINE jack on the base and into a modular jack.

3.Slide the base RINGER switch to ON if you want the unit to ring for incoming calls. (The RINGER switch is located on the same side of the base as the antenna.)

4.Raise the base antenna.

NOTE : The phone automatically defaults to touch-tone dialing. To change to pulse (rotary) dialing, see “Tone/Pulse Dialing. If you don’t know which type of service you have, check with the phone company.

NOTE: For convenience, attach the headset hook to the slots at the back of the base. You can rest the headset here when you are not using it.

4

RINGER

OFFON

1

3

PHONE LINE POWER DC 12V

2

CAUTION: Use only the ATLINKS USA 5-2466 (black)/5-2467 (white) power supply that came with this unit. Using other power supplies may damage the unit.

6