
BenQ PE8700 User’s Manual
■THROUGH :
Inactive area
3.PC&HDTV: The following settings are only available with a PC or DTV RGB signal:
■AUTO: Adjusts the phase, frequency and position automatically.
■FREQ.: Adjusts the frequency of the input signal.
■PHASE: Adjusts the phase of the input signal.
■H. POS.: Adjusts the horizontal position of the image.
■V. POS.: Adjusts the vertical position of image.
4.SAVE: There are three video memories in which the user can store settings, including all items in the Picture menu.
5.LOAD: Loads the settings from one of three video memories.
ENVIRONMENT Menu
In this menu, global settings for the projector can be made.
There are four items available: DEFAULT — LAMP TIMER — AUTO OFF — LAMP HOURS.
1.DEFAULT: Loads the default value of the current input source.
2.LAMP TIMER: Resets the lamp timer. This should only be done after the lamp has been replaced.
3.AUTO OFF: Sets the
4.LAMP HOURS: This displays the number of hours the lamp has been used. (The lifetime of the lamp is 2000 hours.) If lamp usage exceeds 2000 hours, a warning message will be displayed
INSTALLATION Menu
This menu contains items necessary for installation.
225. Menus