BenQ PE8700 User’s Manual
PIP (Picture-In-Picture)/POP (Picture-On-Picture) functions
■Press the PIP button to enable the PIP function.
■For PIP purposes, there are two groups of inputs classfied according to their display modes: Video Group: Video,
Graphic Group: HDTV input and Computer input.
■ The PIP function allows the projector to display one input from the Graphic Group within one input from the Video Group, or display one input from Video Group within one input from the Graphic Group.
■Press the PIP button to switch to the main window or turn off the PIP function.
■Select the input source for the main window by pressing the INPUT button.
■Press the POP key to enable the POP function.
■Press the ACTIVE button to switch to the active window. You can change the input signal setting in the active window.
■Press + or - to adjust the size of the PIP window.
■Adjust the position of the PIP window with the ARROW keys (c/e/d/f).
Turning the Projector Off
■Press the OFF key on the remote control or the STANDBY/ON key on the projector to turn the projector off.
■After turning the projector off, the POWER LED
will flash green and the fans will run for one minute to cool the lamp. The projector will not respond to any commands until cooling process is complete. The POWER LED will be lit a steady orange once the cooling process has finished.
184. Basic Operation
