Remove the fridge door by gently pulling downwards and store to avoid damage.
Unscrew the top door hinge pin of the refrigerator then screw it back on the other side. As shown in the second drawing.
Replace the fridge door on the upper door hinge pin.
Insert the lower door hinge pin into the door and tighten all screws.
Lift the fridge back onto its feet and check it is set level and the door seal meets the fridge all around the door.
Transfer the handle to the opposite side and place the plastic covering inserts, (supplied in the plastic bag of this instruction book) into the holes set free.
Reconnect the fridge to the electricity supply.
Electrical Connection
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
This appliance must be earthed.
The manufacturer declines any liability should these safety measures not be observed.
Electrical Requirements
Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.
The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used. Should the plug need to be replaced
16
