Zanussi ZV 48 RF Operation, Before use, Freezer controls, Starting your appliance, Thermometer

OPERATION

Before use

Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda

(5 ml to 0.5 litre of water). Do not use soap or deter- gent as the smell may linger. Dry thoroughly.

Freezer controls

6

51

42

3

1 2 3 4

1 - Thermostat control knob

2 - Fast freeze switch

3 - Fast freeze light (yellow)

4 - Mains on light (green)

Starting your appliance Thermometer

Insert the plug into the wall socket. The pilot light (4) will light up to show that the appliance is on.

This indicates the internal temperature of the freezer. It may indicate a temperature above -18°C when large quantities of food are placed inside for freezing or when the door is left open for a long time.

Temperature control

The temperature within the freezer is controlled by the thermostat situated at the bottom of the cabinet

(1).

To operate the freezer proceed as follows:

Turn the thermostat control beyond the «O» position. When you first start the freezer, we suggest that you turn the thermostat control to a medium setting. For easier turning of this control, use a small coin.

The internal temperature of the freezer is automati- cally adjusted by the thermostat to ensure safe food storage. However, if the appliance is working in unfavourable room conditions such as high tempera- ture and frequent door openings, it may be neces- sary to select a more suitable setting.

To obtain a colder temperature, turn the thermostat control to the higher numbers; to obtain a warmer temperature turn the control to the lower numbers.

5

Blue = -18°C - -30°C

Beige = above -18°C (-17°C or -10°C for example) Red = alarm (temperature above -9°C)

°C

PR202