SAFETY WARNINGS
CONTINUED
9.Do not disassemble the charger. The charger is not serviceable; disassembly may result in a risk of electric shock or fire.
10.To reduce the risk of electric shock, unplug the charger from the outlet before attempting any cleaning of the charger.
11.Do not use charger outdoors in wet conditions.
12.Charge in a
13.For optimum performance, your ZAP Power System should be charged in a location where the temperature is more than 50° F (10° C) but less than 100° F (37° C). (See “Battery Care on page 14.)
OPERATIONAL SAFETY WARNINGS
1.Keep hands, face, feet, and long hair away from all moving parts.
2.Do not attempt to touch the motor while it is rotating.
3.Always remain alert. To prevent injury to yourself and to others, do not operate your ZAP Power System if you are fatigued or on medication.
4.Do not operate your ZAP Power System while under the influence of drugs, alcohol, or medication.
5.Some states require that all bicycle riders wear a safety helmet. It is recommended that this precaution be followed at all times for maximum safety protection.
6.Never ride at night without functioning rear and front lights, and all safety reflectors on your bike.
7.Be sure all wire connections, especially all battery connections, are tight.
8.Follow all federal, state, and local laws regarding electric bicycles.
OTHER SAFETY WARNINGS
1.Keep your ZAP Power System in good working condition. Only your authorized service dealer should perform any repair or
maintenance procedures that are not described in this manual. Call (707)
2.Use only original equipment manufacturer’s replacement parts when servicing this ZAP Power System. These parts are available from your authorized service dealer. The use of
3.STORE UNIT INDOORS - When not in use, the ZAP Power System should be stored In a cool, dry place - out of reach of children.
4.IMPORTANT! Before storing or ship- ping your ZAP Power System be sure to disconnect your Battery Power
Connector. Remove your battery from 
the bicycle and store it in a FULLY CHARGED CONDITION and away from any objects that may short the battery terminals or Battery Power Connector.
IT IS EXTREMELY IMPORTANT THAT YOU FOLLOW THE SAFETY GUIDELINES CONTAINED IN THIS MANU- AL IN ORDER TO INSURE MAXIMUM SAFETY. FAILURE TO COMPLY WITH THE STANDARDS OUTLINED IN THIS MANUAL COULD RESULT IN FIRE AND/OR SERI- OUS INJURY. ZAP POWER SYSTEMS (ZAP) IS NOT IN ANY WAY RESPONSIBLE OR LIABLE FOR ANY DAM- AGE OR INJURIES CAUSED BY UNSAFE OR FAULTY REPAIRS. ANY REPAIRS MADE TO THIS PRODUCT BY UNAUTHORIZED SERVICE TECHNICIANS ARE THE SOLE RESPONSIBILITY OF THE OWNER.
13
