Zebra Technologies A100 manual Horizontal ± 1.5 mm Ance Vertical ± 1.0 mm

Print density		203 dots/inch	8 dots/mm
		￿
Print width		1 to 4.125	25.6 to 105.0 mm
Print speed		2 /sec	51 mm/sec
		￿￿
Label width (including backing		1 to 4.25	25 to 108 mm
material, if any)		￿
Label length		0.5 to 8	12.7 to 203 mm
		￿￿
Interlabel gap		0.08 to 0.16	2 to 4 mm
		￿￿
Label thickness (including backing		0.003 to 0.010	0.076 to 0.254 mm
material, if any)
Label roll size	Maximum outer	5.0	127 mm
	diameter	￿
	Minimum inner	1.0	25.4 mm
	core diameter	￿
Registration toler-	Horizontal	± 0.059	± 1.5 mm
ance	Vertical	± 0.0393	± 1.0 mm
First dot location (from outer media		0.125 to 0.140	3.17 to 3.56 mm
edge)
Fonts available		All Windows fonts resident in the host computer or Win-
		dows application.
Bar codes available		All bar codes available in the Windows application.
Media requirements		Zebra recommends use of Zebra brand media. All media
		must be direct thermal media. Media may be continuous,
		die-cut, or notched. Notched media must have a notch
		which is 1/4￿wide ¥3/32￿long located on the left side
		of the label as it feeds through the printer.
Physical size (L ¥W ¥H)		9.7￿¥7.0￿¥6.0￿	249 mm ¥179 mm ¥
			154 mm
Weight (without media)		3.35 lb	1.52 kg
Temperature	Operating	50° to 104° F	10° to 40° C
range	Storage	-4° to 140° F	-20° to 60° C
Relative humidity, operation and		10 to 90% R.H.
storage
Electrical		External 120 or 230 VAC power supply, depending on
￿&Communications		which model you order. Additional custom line cords
		may also be available.
		36-pin Centronics™-compatible parallel port