60
Maintenance
Cleaning
7.Align the platen with the gear to the left and lower it into the printer’s bottom frame.
8.Rotate the platen bearing latch release tabs down on the right and left sides towards the rear of the printer and snap them into place.
Allow the printer to dry for one minute before closing the dispenser door, media cover or loading labels.
Other Printer Maintenance
There are no user level maintenance procedures beyond those detailed in this section. See the Troubleshooting on page 65 for more information on diagnosing printer and print problems.
| GC420t™ User Guide | 5/22/2012 |
