![](/images/new-backgrounds/1205267/2052677x1.webp)
SHOCK HAZARD WARNING:
The printer and power supply should never be operated in a location where either one can get wet. Personal injury could result.
MEDIA WARNING:
Always use high quality Eltron approved labels, tags and transfer ribbons. If adhesive backed labels are used that DO NOT lay flat on the backing liner, the exposed edges may stick to the label guides and rollers inside the printer, causing the label to peel off from the liner and jam the printer. Eltron approved supplies can be ordered from your ELTRON dealer. For the name of a dealer in your area, call the nearest Eltron office (located on the back of this manual).
RELOADING HINT:
If you should run out of labels while printing, DO NOT turn the power switch OFF (0) while reloading or data loss may result. The printer will automatically resume printing when a new label roll is loaded.
iv |