CONTROLS
Keypad Functions
On Switch: |
|
| Power Light: | Feed Switch: |
| ||||
momentary action |
|
| Indicates unit | Advances media |
turns on unit |
|
| is turned on | when held down. |
|
|
| Flashing light |
|
|
|
| indicates low |
|
|
|
| battery |
|
|
|
|
|
|
|
|
|
|
|
IR Window; must be aligned with corresponding window on host for IR communications to occur. (Units with IR option only)
Self Test
Status Light: Steady light indicates printer is either out of media, or media cover is open. Flashing during data transmission between host and printer indicates normal wireless operation.
Cameos can perform a self test which will print a line of interlocking “x” characters to insure all elements of the print head are working, and then print out the version of software loaded in the printer. Refer to the Troubleshooting section for details on interpreting the
The self test is activated by the following key sequence:
1.Press the "FEED" key
2.While still holding down the "FEED" key, turn on the printer by pressing and releasing the "ON" key.
3.Keep the "FEED" key depressed until self test starts.
The Cameo will perform the self test and remain on.