Using the Media Cutter
Guidelines Use the cutter to cut through continuous paper from rolls and liner between labels.
You can switch between cutting and feeding by using the OC command. You can set form length and gap distances by using the Q com- mand. Refer to the EPL2 programmer’s man- ual for complete programming information.
Keep the cutter dry. Never use any solutions or solvents to clean the blade. If there is a jam, fol- low the steps for Clearing the Cutter.
Specifications Cutter warranty | 90 days |
Blade life | 500,000 cuts |
Media types | Direct thermal paper |
| Paper label liner |
| Tag stock |
MaximumThickness | 0.0075 in. (0.191mm) |
Density | 150 g/m2 |
Width | 4.00 - 8.75 in. |
| (101.6 - 222.25 mm) |
Minimum length |
|
using cutter | 1.25 in. (31.8 mm) |
58 |
|
