ELECTRICAL INFORMATION

100 - 240 VAC, 50-60 Hz

CAUTIONS

Installation

To ensure that the Charger has proper cooling, do not place any padding or cushioning material under the unit or next to the back of the unit.

Use of Shielded Data Cable

Printers comply with international regulations governing radiated emissions when using fully shielded data cables. Data cables must be fully shielded and fitted with metal or metallized connector shells. Shielded data cables and connectors are required to prevent radiation and reception of electrical noise. Use of unshielded data cables may increase radiated emissions above the regulated limits.

AC Power Considerations

Many areas of the world have specific power requirements. The power supply of the AC charger has interchangeable primary (mains) adapters. Use the mains plug specific to the country or origin of use.

Use the table below as a reference:

Area of use

Mains Adapter p/n

U.S./Japan*AT15309-1

U.K.AT15309-2

EuroAT15309-3

AustraliaAT15309-4

*supplied as standard

AM16905-001 Rev.A

pg. 3 of 10