•Plug the output cable from the Charger to the battery connection on the printer. (Re- fer to the QL Series Users Guide or the or RW 420 Users Guide for more informa- tion.) If you are using a MMQ4 Mobile mount in conjunction with a QL 420 Printer, it may be easier to plug in the charger connector before mounting the Printer to the Mobile Mount bracket.
•Plug the power module into an A.C. power source for the charger on, and verify that the indicator lights on the Charger’s front panel are lit and the Charger is functioning properly. Refer to Table 1 for indicator display information.
NOTE: Zebra Technologies Corporation is not liable for personal injury or damage to equipment caused by improper installation to any power source.
pg. 9 of 10 |