Zenith DVT312 warranty Connections Continued TV Connections, Setup, System, Video Connection, otes

Connections (Continued)

TV Connections

			TV Connections Panel
			S-VIDEO	AUDIO INPUT			VIDEO	SETUP
			INPUT				INPUT
				L	R		L
						V		SYSTEM
			S
R	R	L	L	300

Make one of the following connections, depending on the capabilities of your existing equipment.

ips

Depending on your TV and other equipment you wish to connect, there are two ways you could connect the DVD/CD receiver. Use one of the connections described below.

Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

Caution

–Make sure the DVD/CD receiver is connected directly to the TV. Select the correct AV input on your TV.

–Do not connect your DVD/CD receiver to TV via your VCR. The DVD image could be distorted by the copy protection system.

Video Connection

Connect the MONITOR OUT jack on the DVD/CD receiver to the VIDEO IN jack on the TV using the video cable (V).

S-Video Connection

Connect the S-VIDEO OUT jack on the DVD/CD receiv- er to the S-VIDEO IN jack on the TV using an S-Video cable [not supplied] (S).

otes

The S-VIDEO OUT jack will only output a signal when the function mode is set for CD/DVD.

Before you connect the DVD/CD receiver to your TV, be sure to turn off the power and unplug both units from the wall power outlet before making any connections.

11