Radio Operation
Presetting radio stations
You can preset 30 stations for FM and AM. Before tun- ing, make sure that you have turned down the volume.
1 Press BAND on the remote control until FM or AM appears in the display window.
2 With each press of BAND, FM and AM changes alternately.
3the front panel for about two seconds until the frequency indicator changes, then release.
Scanning stops when the DVD/CD Receiver tunes in a
station. “TUNED” and “STEREO” (for stereo program)
appear in the display window.Press and hold TUNING or on
ote
“TUNED” only appears when the signal is FM and
STEREO.
Press MEMORY on the front panel.
4 A preset number will flash in the display window.
5panel to select the preset number you want.Use TUNING or on the front
Press MEMORY on the front panel again.
6 The station is stored.
7Repeat steps 3 to 6 to store other stations.
To tune in a station with a weak signal
Press TUNING |
| or |
| repeatedly in step 3 |
|
| |||
to tune in the station manually. |
|
| ||
To clear all the stored stations
Press and hold MEMORY for about two seconds and
“CLEAR ALL” appear in the display window, then press MEMORY again, the stations are removed from memo- ry.
If you have accidentally entered into the "CLEAR ALL" mode and you do not wish to clear the memory, do not press any key. Wait. After a few seconds, the "CLEAR ALL" display will go off by itself and change to normal mode.
ote
If all stations slots have already been entered, the FULL message will appear in the display window for a moment and then a preset number will flash.
To change the preset number, follow steps
Listening to the radio
Preset radio stations in the DVD/CD receiver’s memory first (see “Presetting radio stations” on the left).
Press BAND repeatedly until AM or FM appears
1 in the display window.
The last received station is tuned in.
2set station you want.
Each time you press the button, the DVD receiver tunes in one preset station at a time.Press PRESET +/- repeatedly to select the pre-
3front panel or by pressing VOLUME + or - on the remote control repeatedly.Adjust the sound by rotating VOLUME on the
To turn off the radio
Press POWER to turn the DVD/CD receiver off or select another function mode (CD/DVD or AUX).
To listen to non-preset radio stations
Use manual or automatic tuning in step 2.
For manual tuning, press TUNING |
| or |
| ||
on the front panel repeatedly. |
|
|
For automatic tuning, press and hold TUNING
or 
for about two seconds on the front panel.
To select a preset radio station directly
You can use the number buttons on the remote control to select a preset radio station directly.
For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 then 9 (within 3 seconds).
For your reference
If an FM program is noisy
Press MONO/STEREO repeatedly on the front panel so that “STEREO” disappears in the display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect.
To improve reception
Reorient the supplied antennas.
28
