Owner’s Manual 9
Installation
- Antenna or Cable Service without a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Antenna ConnectionAntenna ConnectionConnections for Analog and Digital TV signals provided on one antenna
NOTE: If you are not sure of the type of signal(s) you are receiving, let EZ Scan complete all the channel signal-type searches.
The TV will let you know when the analog, cable, and digital channel scans are complete.
Connections for Analog and Digital TV signals provided on two separate antennas
In a poor signal area to improve picture quality, purchase
and install a signal amplifier.
If the antenna needs to be split for two TVs, install a 2-
Way Signal Splitter in the connections.
If the antenna is not installed properly, contact your deal-
er for assistance.
ANTENNA1 ANTENNA 2
Signal
Amplifier
ANTENNA1 ANTENNA 2
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor
Antenna
Wall Antenna
Socket
VHF Antenna
UHF Antenna
RF Coaxial Wire (75 ohm)
Bronze Wire
Turn clockwise to tighten.
Bronze Wire
Be careful not to bend the bronze wire when
connecting the antenna.
ANTENNA1 ANTENNA 2
Wall Antenna
Socket RF Coaxial Wire (75 ohm)
Analog Antenna
Digital Antenna
Bronze Wire
Bronze Wire
Turn clockwise to tighten.