Operation

■STOPPING ENGINE

1.Release the throttle lever and run the engine for a half minute.

2.Shift the ignition switch to the STOP position.

NOTE

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

■ADJUSTING IDLING SPEED

1.When the engine tends stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

NOTE

•Warm up the engine before adjusting the idling speed.

■LINE HEAD USAGE WARNING

1.Always wear eye protection such as safety goggles. Never lean over the rotating cutting head. Rocks or other debris could be thrown into eyes and face and cause serious personal injury.

2.Keep the debris guard attached in place at all times when the unit is operated.

TRIMMING GRASS AND WEEDS

•Always remember that the TIP of the line does cutting. You will achieve better results by not crowding the line into the cutting area. Allow the unit to trim at its own pace.

1.Hold the unit so the head is off the ground and is tilted about 20 degrees toward the sweep direction.

2.Use full throttle when cutting.

3.You can avoid thrown debris by sweeping from your left to the right.

4.Use a slow, deliberate action to cut heavy growth. The rate of cutting motion will depend on the material being cut. Heavy growth will require slower action than will light growth.

5.Never swing the unit so hard as you are in danger of losing your balance or control of the unit.

6.Try to control the cutting motion with the hip rather than placing the full workload on the arm and hands.

7.Take precautions to avoid wire, grass and dead, dry, long-stem weeds from wrapping around the head shaft. Such materials can stall the head and cause the clutch to slip, resulting in damage to the clutch system if repeated frequently.

ADJUSTING THE LINE LENGTH

•Your brushcutters is equipped with a semi- auto type nylon line head that allows the operator to advance the line without stopping the engine. When the line becomes short, lightly tap the head on the ground while running the engine at full throttle.

•Each time the head is bumped, the line advance about 1 inch(25.4 mm). For better effect, tap the head on bear ground or hard soil. Avoid bumping in thick, tall grass as the engine may stall by overload.

12

Page 11 Page 13
Page 12
Image 12
Zenoah BC2601DL manual  12 
Page 11 Page 13

BC2601DL specifications

The Zenoah BC2601DL is a high-performance brush cutter designed for both commercial and residential use. Known for its powerful features and robust construction, this machine stands out in the field of outdoor power equipment. It combines advanced technology with user-friendly functionality, making it an ideal choice for professionals and hobbyists alike.

One of the main features of the BC2601DL is its highly efficient 25.4cc engine. This two-stroke engine delivers ample power while maintaining impressive fuel efficiency. The engine is designed to reduce emissions, making it an environmentally friendly option for outdoor work. Whether tackling thick grass, dense weeds, or light brush, the BC2601DL offers the muscle needed for heavy-duty tasks.

Another noteworthy characteristic of the Zenoah BC2601DL is its lightweight design. Weighing only about 4.5 kg, this brush cutter is easy to maneuver, allowing users to work for extended periods without fatigue. The ergonomic handling is enhanced by the comfortable grips and well-placed controls, ensuring that anyone can achieve optimal performance without straining their body.

The BC2601DL features a durable cutting head that can accommodate various trimmer line sizes and types. This versatility allows users to customize their tools based on the specific demands of each job. Additionally, the quick-release head makes it simple to switch between cutting lines or blades, maximizing efficiency and productivity.

Its advanced anti-vibration technology is another standout feature. This system minimizes vibrations during operation, resulting in a smoother experience for the user and reducing the risk of fatigue during prolonged work. This is particularly advantageous for professionals who use the tool daily and need to maintain comfort and control.

The Zenoah BC2601DL is built with rugged materials, ensuring durability and longevity. It can withstand challenging working conditions, making it a reliable choice for both landscaping and gardening tasks. With its combination of power, versatility, and thoughtful engineering, this brush cutter proves to be a dependable companion for anyone who needs a tool for cutting grass and brush effectively.

In summary, the Zenoah BC2601DL combines a powerful 25.4cc engine, lightweight construction, ergonomic features, and advanced technologies to create a standout brush cutter. Whether you are a professional landscaper or a homeowner looking for a reliable tool, the BC2601DL delivers excellent performance and ease of use for all outdoor tasks.
Top Page Image Contents