Optional Blade Usage
OPT3
OPT4
FOR BC3401DL
OPT5
OPT6
IMPORTANT
Change to the debris guard which is suitable for the metal blade. (OPT3)
(1) Bolt | : |
(2) Spring washer | : |
(3) Clamp | : |
(4) Guard | : |
(5) Guard ass’y | : |
TIGHTENING TORQUE: 130~174
IMPORTANT
Change the loop handle to the
(1)Bracket : 3532-14102
(2)J-handle : 6367-14200
■STARTING ENGINE
Please refer to P.15 ■ STARTING ENGINE
WARNING
•The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts.
■CUTTING METHOD
a)Use the front left side cutting.
b)Guide the blade from your right to left with it tilted slightly to your left. (OPT6)
c)When mowing a wide area, start working from your left end to avoid interference of cut grass.
d)The blade may be seized by weeds if the engine speed is too low, or the blade cuts too deep into weeds. Adjust the engine speed and cutting
