Zenoah BC4500WE, BC3500LE/WE, BC3500WE, BC2300LE, BC530WE, BC2610LE/WE, BC2310LE Specifications

Make sure that the spring and the washers are in place.

6.While holding the spool against the housing, pull the line ends to release them from the slot.

7.Line up the slot on the bottom cap with the hook on the housing, press the cap against the housing until it clicks.

■AIR FILTER

•A clogged air filter will reduce the engine performance. Check periodically and clean the filter element in warm, soapy water as required. Dry completely before installing. If the element is broken or shrunk, replace with a new one.

■FUEL FILTER

•When the engine runs short of fuel supply, check the fuel strainer for blockage.

■SPARK PLUG

•Starting failure and mis-firing are often caused by a fouled spark plug. Periodically clean the spark plug, and replace with a new one as required.

Model	Type of Plug	Spark Gap
BC2310LE	NGK BPMR7A	0.6 ~ 0.7 mm
BC2610LE / WE	NGK BPMR7A	0.6 ~ 0.7 mm
BC3500LE / WE	NGK BPMR7A	0.6 ~ 0.7 mm
BC4500LE	NGK BPMR7A	0.6 ~ 0.7 mm
BC530WE	NGK BPMR6A	0.6 ~ 0.7 mm

■GEARCASE

•Supply multi-purpose grease at every 25 hours of use.

1.Remove the cutter holders.

2.Charge grease until waste grease appears around the gear shaft.

■MAINTENANCE BEFORE STORAGE

•Old fuel left in the carburetor may cause starting failure. When a series of operation finished, make sure to empty the fuel tank and drain the carburetor.

•Check all parts and the functions. If the failured or damaged parts have been found, replace them with new ones.

7

Specifications

MODEL CODE	Unit	BC2310LE	BC2610LE		BC2610WE	BC3500LE	BC3500WE		BC4500WE	BC530WE
Overall size
Length	mm	1810		←	←	1850	←		1860	1875
Width	mm	245		←	665	390	630		←	←
Height	mm	240		←	530	340	465		←	←
Dry weight	Kg	4.8		4.9	5.4	6.4	7.0		7.3	8.9
Engine model	✽	G23LS		G26LS	←	G35L-D	←		G45L-D	G5K-D
Displacement	cc	22.5		25.4	←	33.6	←		41.5	52.5
Carburetor	✽	Diaphragm		←	←	←	←	←		←
Fuel (Mixture ratio)	✽	50:1 (Gasoline and 2cycle oil)		←	←	←	←	←		←
Fuel tank capacity	litter	0.6		0.75	←	0.74	←		0.94	1.0
Service range	rpm	5000~8000		←	←	←	←	←		←
Spark plug	✽	BPMR7A		←	←	←	←	←		BPMR6A
Clutch system	✽	Two-shoe Centrifugal-Type		←	←	←	←	←		←
Anti-vibration system
Housing	✽	Yes		←	←	←	←	←		No
Handle-bracket	✽	No		←	←	←	Yes		←	←
Gearhead
Neck angle	deg	60		←	←	←	←	←		←
Reduction ratio	✽	1.357		←	←	←	←	←		←
Blade rotation	✽	Counter-clockwise		←	←	←	←	←		←
Handle type	✽	Loop		←	Both	Loop	Both		←	←
Throttle lever	✽	Trigger Type (With Safety-lock) ←			←	←	←	←		←
Standard cutter	✽	Nylon		←	←	←	←	←		←
Harness type	✽	Single		←	←	Double	←		←	←
Quick release	✽	Yes		←	←	←	←	←		←
Standard accessories
Goggle	✽	●		←	←	←	←	←		←
Tool-kit	✽	●		←	←	←	←	←		←
Owner's manual	✽	●		←	←	←	←	←		←

Specifications are subject to change without notice.