Introduction
This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and maintenance procedures for a Powermatic Model DS20 Disc Sander. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or Walter Meier. Walter Meier can also be reached at our web site: www.waltermeier.com.
Specifications |
|
Model Number | DS20 |
Stock Number (3HP, 3Ph, 230/460V – prewired 230V) | 1791264 |
Stock Number (2HP, 1Ph, 230V) | 1791276 |
Disc Diameter (in.) | 20 |
Table Tilt (deg.) | 30 up, 45 down |
Table Size (in.) | |
Table Surface from Floor, minimum height (in.) | |
Table Surface from Floor, maximum height (in.) |
|
Distance Between Disc and Table (in.) | 0.20 |
Distance Between Mounted Abrasive and Table (in.) | 0.17 |
Dust Port Diameter (in.) | 4 |
Dust Collection Minimum CFM Required | 600 |
Disc Speed (RPM) | 1,720 |
Overall Size (LxWxH)(in.) | 31 x 28 x |
Footprint (LxW)(in.) | |
Net Weight, approximate (lbs.) | 426 |
Shipping Weight, approximate (lbs.) | 529 |
The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Walter Meier reserves the right to change specifications at any time and without prior notice, without incurring obligations.
Unpacking
Open shipping container and check for shipping damage. Report any damage immediately to your distributor and shipping agent. Do not discard any shipping material until the Disc Sander is installed and running properly. Read the instruction manual thoroughly for assembly, maintenance and safety instructions.
Contents of shipping container:
1DS20 Disc Sander
120” Abrasive Paper
1Brake Assembly
1Instruction and Parts Manual
1Warranty Card
6
