Zenoah BCZ3000 Muffler, Spark Arrester, spark arrester GEAR CASE MA6, Intake Air Cooling Vent

Models: BCZ3000

1 40
Download 40 pages 38.21 Kb
Page 23
Image 23
■MUFFLER

9. Maintenance

MA5

(1)

MA6

MUFFLER

■SPARK ARRESTERWARNING

Inspect periodically, the muffler for loose fasteners, any damage or corrosion. If any sign of exhaust leakage is found, stop using the machine and have it repaired immediately.

Note that failing to do so may result in the engine catching on fire.

SPARK ARRESTER

The muffler is equipped with a spark arrester to prevent red hot carbon from flying out of the exhaust outlet. Periodically inspect and clean as necessary with a wire brush. In the State of California it is required by law (Section 4442 of the California Public Resources Code) to equip a spark arrester when a gas powered tool is used in any forest covered, brush covered, or grass covered unimproved land. (MA5)

(1) spark arrester

GEAR CASE (MA6)

The reduction gears are lubricated by multipurpose, lithium-based grease in the gear case. Supply new grease every 25 hours of use or more often depending on the job condition.

Remove the side bolt in gearcase opposite of grease nipple before installing new grease to arrange for old grease to exit.

INTAKE AIR COOLING VENT

(1) spark arresterWARNING

Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns.

When checking the machine to make sure that it is okay before using it, check the area around the muffler and remove any wood chips or leaves which have attached themselves to the brushcutter. Failing to do so could cause the muffler to become overheated, and that this in turn could cause the engine to catch on fire. Always make

23

Page 23
Image 23
Zenoah BCZ3000 manual Muffler, Spark Arrester, spark arrester GEAR CASE MA6, Intake Air Cooling Vent, 23 , Maintenance