Zenoah BCZ3000 OPT2, OPT3, Set Up The Blade, Cover, 3540-13283, Holder B, 6019-13250, Standard

11. Optional blade usage

OPT2	(3)
	(1)
	(2)

OPT3

(1)

■SET UP THE BLADE

1.Detach the line head assembly. (OPT2)

2.Put on the blade, making the marked side face the shaft side, put the holder and the cover on, and fasten the blade with the nut. (OPT2)

(1) Cover:	3540-13283
(2) Holder (B):	6019-13250	(STANDARD)
(3) Nut:	T3002-13260	(STANDARD)

IMPORTANT

[BCZ3000S/BCZ3000SW]

Change to the debris guard which is suitable for the metal blade. (OPT3)

OPT4

TIGHTENING TORQUE:

(1) Guard: T3246-24110

IMPORTANT

[BCZ3000S]

26~43.5 in-lbs (2.94~4.9 N.m.)

OPT5

26 

Change the loop handle to the J-handle for safe operation. (OPT4)

(1)Bracket: 3583-14101

(2)J-handle: 6367-14200

■BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Slide clamp up or down until unit balances with head just touching on the ground. (OPT5)

■STARTING THE ENGINE

Please refer 5.For safe operation (P.9~10), 8.Operation (P.18).

WARNING

•The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is