BCZ4000DL / BCZ4000DW / BCZ4200CL

9. Maintenance

REFILLING TRIMMING LINE

1.For replacement line, use a diameter of 2.4mm(.095in). The spool is capable for a line upto 6m(20ft) on the 10cm(4”) head. Avoid using a larger line as it may cut down the trimming performance.

WARNING

•For safety reasons, do not use metalreinforced line.

2.Pinch the slotted area on the both sides of the spool housing to unhook the bottom cap.

3.Take out the spool and pull off the old line. Put one end of new line through the spool holes and pull it until the length is equal between each part of the line.

4.Wind up the line in the correct direction as indicated on the spool.

5.Hook each end of the line in the slot on the edge of the spool, and then put the ends through the eyelets on the housing. Make sure that the spring and the washers are in place.

6.While holding the spool against the housing, pull the line ends to release them from the slot.

7.Line up the slot on the bottom cap with the hook on the housing, press the cap against the housing until it clicks.

BLADE

•Check the blade and the fasteners for looseness, cracking, or bending.

•Check the cutting edges and reform with a flat file.

Point :

1.Keep the end corner sharp.

2.Round the root of the edge, using round file.

3.Do not use water when using a grinder.

•It is recommended that filing should be done by professionals.

•Especially regarding filing the saw blade, Leave it to the professionals.

WARNING

•Make sure that the engine has stopped and is cool before performing any service to the machine. Contact with moving cutting head or hot muffler may result in a personal injury.

AIR FILTER

•The air filter, if clogged, will reduce the engine perfor- mance.

•Filter element : Check and clean the filter element in warm, soapy water as required. Dry completely be- fore installing.

•Paper element : Check and clean the paper element by air blow as required.

•If the element is broken or shrunk, replace with a new one.

(2)(1)

(1) Filter element

(2) Paper element

WARNING

•This filter element is dry type.

•Never wash the filter element in oleaginous cleaning solution.

FUEL FILTER

•When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage.

(1) Fuel filter

(1)

SPARK PLUG

• Starting failure and misfiring are often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a re- placement plug, use the correct type specified by

KOMATSU ZENOAH.

GB-14

Page 13 Page 15
Page 14
Image 14
Zenoah BCZ4000DW, BCZ4200CL owner manual Refilling Trimming Line, Blade, AIR Filter, Fuel Filter, Spark Plug
Page 13 Page 15

BCZ4200CL, BCZ4000DW specifications

Zenoah, a renowned name in the outdoor power equipment industry, has made a significant impact with its innovative line of brushcutters, particularly the BCZ4000DW and BCZ4200CL models. Designed to meet the demands of both professional landscapers and avid gardeners, these brushcutters combine power, efficiency, and user-friendly features.

The Zenoah BCZ4000DW is equipped with a robust 40cc engine that combines impressive performance with reduced emissions, complying with stringent environmental standards. This model features a lightweight design, making it highly maneuverable and easy to handle for extended periods. The ergonomically designed handles reduce operator fatigue, ensuring comfort during long cutting sessions. One notable feature is its Easy Start system, which simplifies ignition, allowing users to get to work without frustrating pull starts.

On the other hand, the BCZ4200CL takes power a step further with a 42.5cc engine, delivering enhanced torque and efficiency. This model is particularly suited for heavier-duty tasks, such as clearing dense brush and overgrown areas. Its 2-in-1 head allows for convenient switching between cutting blades and nylon trimmer line, providing versatility for various landscaping needs. The bike handle design enhances stability and control, making it an ideal choice for professional users who require precision in their work.

Both models employ advanced anti-vibration technology, which minimizes hand fatigue and strain, promoting user comfort and safety. The fuel-efficient design maximizes runtime, ensuring that users can complete their tasks without frequent refueling. Additionally, the durable construction of the BCZ4000DW and BCZ4200CL models ensures longevity in challenging working environments.

Maintenance is made easy thanks to the accessible air filter and tool-less fuel cap, allowing for quick checks and refills. These features contribute to the overall reliability of the machines. With Zenoah’s commitment to quality, both the BCZ4000DW and BCZ4200CL are backed by a solid warranty, offering peace of mind for users.

In conclusion, the Zenoah BCZ4000DW and BCZ4200CL brushcutters stand out in the market for their blend of power, efficiency, and user-friendly features. Whether tackling tough vegetation or maintaining a tidy garden, these models provide the performance needed to get the job done effectively and comfortably.
Top Page Image Contents