Manuals / Zenoah / Lawn and Garden / Brush Cutter

Zenoah BCZ4000DW, BCZ4200CL owner manual Operation, Starting Engine, Stopping Engine

Models: BCZ4200CL BCZ4000DW

1 16
Download 16 pages 42.65 Kb
Page 10
Image 10

BCZ4000DL / BCZ4000DW / BCZ4200CL

8. Operation

STARTING ENGINE

WARNING

•The cutting head will start rotating upon the en- gine starts.

1.Feed fuel into the fuel tank and tighten the cap se- curely.

2.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects, as it will start rotating upon starting of the engine.

3.Push the primer several times until overflown fuel flows out in the clear tube.

(1)

(1) Primer

4. Move the choke lever to the closed position.

(1)

(2)

(3) (1) Choke lever

(2) Close

(3) Open

5.Set the stop switch to the “RUN” position. Place the unit on a flat, firm place.

Keep the cutting head clear of everything around it.

(1)

(1)

(1) Stop switch

6.While holding the unit firmly, pull out the starter rope quickly until engine fires.

WARNING

•The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to

GB-10

rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the en- gine starts.

IMPORTANT

•Avoid pulling the rope to its end or returning it by re- leasing the knob. Such actions can cause starter fail- ures.

7.Move the choke lever downward to open the choke. And restart engine.

8.Allow the engine to warm up for a several minutes before starting operation.

NOTE

1.When restarting the engine immediately after stop- ping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

STOPPING ENGINE

1.Release the throttle trigger and run the engine for half a minute.

2.Shift the stop switch to the STOP position.

(1)

(1)

(1) Stop switch

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the throttle trigger.

Page 9 Page 11
Page 10
Image 10
Zenoah BCZ4000DW Operation, Starting Engine, Cutting head will start rotating upon the en- gine starts, Stopping Engine
Page 9 Page 11

BCZ4200CL, BCZ4000DW specifications

Zenoah, a renowned name in the outdoor power equipment industry, has made a significant impact with its innovative line of brushcutters, particularly the BCZ4000DW and BCZ4200CL models. Designed to meet the demands of both professional landscapers and avid gardeners, these brushcutters combine power, efficiency, and user-friendly features.

The Zenoah BCZ4000DW is equipped with a robust 40cc engine that combines impressive performance with reduced emissions, complying with stringent environmental standards. This model features a lightweight design, making it highly maneuverable and easy to handle for extended periods. The ergonomically designed handles reduce operator fatigue, ensuring comfort during long cutting sessions. One notable feature is its Easy Start system, which simplifies ignition, allowing users to get to work without frustrating pull starts.

On the other hand, the BCZ4200CL takes power a step further with a 42.5cc engine, delivering enhanced torque and efficiency. This model is particularly suited for heavier-duty tasks, such as clearing dense brush and overgrown areas. Its 2-in-1 head allows for convenient switching between cutting blades and nylon trimmer line, providing versatility for various landscaping needs. The bike handle design enhances stability and control, making it an ideal choice for professional users who require precision in their work.

Both models employ advanced anti-vibration technology, which minimizes hand fatigue and strain, promoting user comfort and safety. The fuel-efficient design maximizes runtime, ensuring that users can complete their tasks without frequent refueling. Additionally, the durable construction of the BCZ4000DW and BCZ4200CL models ensures longevity in challenging working environments.

Maintenance is made easy thanks to the accessible air filter and tool-less fuel cap, allowing for quick checks and refills. These features contribute to the overall reliability of the machines. With Zenoah’s commitment to quality, both the BCZ4000DW and BCZ4200CL are backed by a solid warranty, offering peace of mind for users.

In conclusion, the Zenoah BCZ4000DW and BCZ4200CL brushcutters stand out in the market for their blend of power, efficiency, and user-friendly features. Whether tackling tough vegetation or maintaining a tidy garden, these models provide the performance needed to get the job done effectively and comfortably.