Manuals / Zenoah / Lawn and Garden / Brush Cutter

Zenoah BCZ4200CL, BCZ4000DW Adjusting Throttle Cable, Adjusting Idling Speed, Metal Blade Usage

Models: BCZ4200CL BCZ4000DW

1 16
Download 16 pages 42.65 Kb
Page 11
Image 11

8. Operation

ADJUSTING THROTTLE CABLE

•The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as required.

(2)

(1)

Cable adjuster

 

(1)

(2)

1~2mm (0.04in)

ADJUSTING IDLING SPEED

 

 

(1)

 

 

BCZ4000DL / BCZ4000DW / BCZ4200CL

METAL BLADE USAGE

1.

Check the bolt to fasten the blade and be sure the

 

 

bolt has no fault, and no abrasion.

 

2.

Be sure that the blade and the holder have been fas-

 

 

tened according to instruction and the blade turns

G

 

smoothly without abnormal noise.

B

 

 

(1) Idle adjusting screw (cross screw)

1.When the engine tends to stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

NOTE

• Warm up the engine before adjusting the idling speed.

CUTTER APPLICATION CHART

•Replace by a suitable recommended cutting attach- ment according to the object to be cut.

•When replacing blade always be sure to use products which have been certified by KOMATSU ZENOAH.

WARNING

•When sharpening, removing, or reattaching the blade, be sure to wear thick, sturdy gloves and use only proper tools and equipment to prevent injury.

WARNING

•The rotating parts fastened incorrectly may cause serious accident to the operator.

•Make sure that the blade is not bent, warped, cracked, broken or damaged.

•If you find any error to the blade, discard it and change new one which is certified by KOMATSU ZENOAH.

•By using the shoulder strap, hang the unit on your right side. Adjust the strap length so that the cutting head may become parallel to the ground.

WARNING

•Make sure to use shoulder strap and cutting at- tachment guard. If not, it is vary dangerous when you slip or lose your balance.

BCZ4200CL848-JL0-6913

BCZ4000DL/DW 848-JG0-6911

BCZ4200CL848-JL0-92A2

BCZ4000DL/DW 6298E3390

•BCZ4000DL, BCZ4000DW, BCZ4200CL : Be sure to use genuine parts made of Zenoah for blades. In par- ticular, never use special blades such as shredder blades. If you use a special blade, the unit may fail.

•BCZ4000DL, BCZ4000DW : Do not use the Zenoah blade 848-JLO-92A2 or the blade whose thickness is more than 2mm.

GB-11

Page 10 Page 12
Page 11
Image 11
Zenoah BCZ4200CL, BCZ4000DW Adjusting Throttle Cable, Adjusting Idling Speed, Metal Blade Usage, Cutter Application Chart
Page 10 Page 12

BCZ4200CL, BCZ4000DW specifications

Zenoah, a renowned name in the outdoor power equipment industry, has made a significant impact with its innovative line of brushcutters, particularly the BCZ4000DW and BCZ4200CL models. Designed to meet the demands of both professional landscapers and avid gardeners, these brushcutters combine power, efficiency, and user-friendly features.

The Zenoah BCZ4000DW is equipped with a robust 40cc engine that combines impressive performance with reduced emissions, complying with stringent environmental standards. This model features a lightweight design, making it highly maneuverable and easy to handle for extended periods. The ergonomically designed handles reduce operator fatigue, ensuring comfort during long cutting sessions. One notable feature is its Easy Start system, which simplifies ignition, allowing users to get to work without frustrating pull starts.

On the other hand, the BCZ4200CL takes power a step further with a 42.5cc engine, delivering enhanced torque and efficiency. This model is particularly suited for heavier-duty tasks, such as clearing dense brush and overgrown areas. Its 2-in-1 head allows for convenient switching between cutting blades and nylon trimmer line, providing versatility for various landscaping needs. The bike handle design enhances stability and control, making it an ideal choice for professional users who require precision in their work.

Both models employ advanced anti-vibration technology, which minimizes hand fatigue and strain, promoting user comfort and safety. The fuel-efficient design maximizes runtime, ensuring that users can complete their tasks without frequent refueling. Additionally, the durable construction of the BCZ4000DW and BCZ4200CL models ensures longevity in challenging working environments.

Maintenance is made easy thanks to the accessible air filter and tool-less fuel cap, allowing for quick checks and refills. These features contribute to the overall reliability of the machines. With Zenoah’s commitment to quality, both the BCZ4000DW and BCZ4200CL are backed by a solid warranty, offering peace of mind for users.

In conclusion, the Zenoah BCZ4000DW and BCZ4200CL brushcutters stand out in the market for their blend of power, efficiency, and user-friendly features. Whether tackling tough vegetation or maintaining a tidy garden, these models provide the performance needed to get the job done effectively and comfortably.