Warning on Use,
Installation, and Operation!
(Safety Precautions)
●The blade of
●Before using this product, make sure there is no broken or cracked part of the blade.
●Never use a blade that is broken, deformed, or worn down. Use Zenoah’s genuine blades.
●
●If the blade hits stone, concrete, metal, or any other object, it could cause serious injury to the user of this product or people nearby. Be careful to avoid such objects. If the product does hit an object, stop work immediately and check the blade thoroughly.
●When storing the machine, put the cover on the blade. When using the machine, always keep the safety guard installed.
●Install the blade correctly, and make sure the connecting pin in the blade does not come out of place.
●Cut branches of soft trees; do not cut hard trees.
●If abnormal or unusual vibration occurs, stop work immediately and check the blade.
●Do not use this blade for any other manufacturer’s
●While using this machine, prevent any person or animal from accessing the area within 15 m of the machine.
●Be sure to wear protective gear when using the machine.
●When replacing the blade,
1)Make the lower part of the blade edges round. Otherwise, the blade edges could chip off.
2)An unbalance blade increases the vibration of the machine. Make sure the blade is not unbalanced.
3)Note that the blade becomes hot. When the blade becomes hot, cool it in air gradually. Cooling it with water might cause invisible cracks.
●For details of the kind, specifications, material name, and other instructions for the blade, refer to the face of the blade.
●Manufactured in Japan.
●Japanese supplier: Komatsu Zenoah Co. Japan
Working for a better tomorrow
Head Office:
PRINTED IN JAPAN
