eHT752S / eHT602D
EC DECLARATION OF CONFORMITY
We, | Husqvarna Zenoah Co., Ltd. |
declare in sole responsibility that the following products referred to in this declaration conform with
DIRECTIVE 89/336/EEC, 98/37/EC
2000/14/EC Internal control production.
The products referred to are: |
|
DESIGNATION | : HEDGE TRIMMER |
MODELS | : eHT752S eHT602D |
SERIAL NUMBERS | : 50100001 and up |
The company named above will keep on file the following technical docu- mentation for any inspection purpose.
•Operation instructions
•Plans and Drawings
•Description of measures designed to ensure conformity
• Other technical documentation : | Specification sheet |
| Inspection standard |
Saitama, Japan | 1st December 2007 |
Masahiko GOUDA
General Manager, Quality Assurance Department
G B
SAFETY FIRST
Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail.
WARNINGS IN THE MANUAL
WARNING
This mark indicates instructions, which must be followed in or- der to prevent accidents, which could lead to serious bodily in- jury or death.
IMPORTANT
This mark indicates instructions, which must be followed, or it leads to mechanical failure, breakdown, or damage.
NOTE
This mark indicates hints or directions useful in the use of the product.
Contents |
| |
1. | Parts location | 4 |
2. | Specifications | 4 |
3. | Warning labels on the machine | 5 |
4. | Symbols on the machine | 5 |
5. | For safe operation | 6 |
6. | Fuel | 9 |
7. | Operation | 10 |
8. | Maintenance | 12 |
9. | Storage | 15 |
10. | Disposal | 15 |
11. | Troubleshooting guide | 16 |