8. Operation

OP6

(5)

(6)

(4)

(7)

OP7

OP8

lever is in to the “start” position. (OP6)

6.While holding the unit firmly, pull out the starter rope quickly until engine fires. (OP7)

(1)choke lever (2) close (3) open

(4)ignition switch (5) start (6) stop

(7)throttle set button

WARNING

The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. (OP8)

IMPORTANT

Avoid pulling the rope to its end or returning it by releasing the knob. Such actions can cause starter failures.

7.Move the choke lever downward to open the choke. And restart engine. (OP5)

8.Allow the engine to warm up for a several minutes before starting operation.

NOTE

1.When restarting the engine immediately after stopping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

STOPPING ENGINE (OP6)

1.Release the throttle lever and run the engine for a half minute.

2.Shift the ignition switch to the STOP position.

22

Page 22
Image 22
Zenoah EXZ2500S manual OP6 OP7 OP8, Stopping Engine OP6,  22 

EXZ2500S specifications

The Zenoah EXZ2500S stands out in the realm of outdoor power equipment, particularly known for its exceptional performance and reliability. Designed primarily for commercial and heavy-duty landscaping applications, this engine delivers a potent combination of power, efficiency, and durability, making it a preferred choice among professionals.

At the heart of the EXZ2500S is a high-performance, two-stroke engine. With a displacement of 25.4cc, this unit is engineered to produce robust power output while maintaining a lightweight profile. Weighing in at just around 5.5 kg, the engine allows for increased maneuverability, reducing fatigue during prolonged use. The two-stroke design is not just about power; it also facilitates a simpler maintenance routine compared to its four-stroke counterparts.

One of the standout features of the Zenoah EXZ2500S is its advanced ignition system, which ensures reliable starting in various conditions, even in cold weather. The CDI (Capacitor Discharge Ignition) technology contributes to improved fuel efficiency, allowing operators to get more work done while using less fuel. This is particularly beneficial for those who prioritize both performance and cost-saving in their operations.

The EXZ2500S is equipped with a durable fuel tank, providing an optimal capacity that minimizes the frequency of refueling. This characteristic is especially advantageous for commercial users who require extended runtimes during their work hours. Additionally, the system incorporates a fuel filter that ensures clean fuel delivery to the engine, promoting longevity and consistent performance.

Another noteworthy aspect of the Zenoah EXZ2500S is its ergonomic design. The handle is designed to reduce vibrations, contributing to user comfort and control, especially during extended periods of use. This feature not only enhances productivity but also ensures that operators maintain precision in their tasks, from trimming to cutting.

Lastly, the EXZ2500S is built with durability in mind. The materials used in its construction are resistant to wear and tear, making it suitable for rigorous applications. Whether you're tackling thick brush or performing detailed landscaping tasks, the Zenoah EXZ2500S resonates with reliability that professionals can depend on.

In conclusion, the Zenoah EXZ2500S combines power, efficiency, and comfort, making it an exceptional choice for outdoor professionals. With its innovative technology and robust features, it is poised to meet the demands of the most challenging landscaping jobs, ensuring that users can execute their tasks with confidence and precision.