7. Fuel

again for at least one minute. As some oils may be difficult to agitate depending on oil ingredients, sufficient agitation is necessary for the engine to last long. Be careful that, if the agitation is insufficient, there is an increased danger of early piston seizing due to abnormally lean mixture.

5.Put a clear indication on the outside of the container to avoid mixing up with gasoline or other containers.

6.Indicate the contents on outside of container for easy identification.

■FUELING THE UNIT

1.Untwist and remove the fuel cap. Rest the cap on a dustless place.

2.Put fuel into the fuel tank to 80% of the full capacity.

3.Fasten the fuel cap securely and wipe up any fuel spillage around the unit.

WARNING

1.Select bare ground for fueling.

2.Move at least 10feet (3meters) away from the fueling point before starting the engine.

3.Stop the engine before refueling the unit. At that time, be sure to sufficiently agitate the mixed gasoline in the container.

FOR YOUR ENGINE LIFE, AVOID;

1.FUEL WITH NO OIL(RAW GASOLINE) – It will cause severe damage to the internal engine parts very quickly.

2.GASOHOL – It can cause deterioration of rubber and/or plastic parts and disruption of engine lubrication.

3.OIL FOR 4-CYCLE ENGINE USE – It can cause spark plug fouling, exhaust port blocking, or piston ring sticking.

4.Mixed fuels which have been left unused for a period of one month or more may clog the carburetor and result in the engine failing to operate properly.

5.In the case of storing the product for a

20

long period of time, clean the fuel tank after rendering it empty. Next, activate the engine and empty the carburetor of the composite fuel.

6.In the case of scrapping the used mixed oil container, scrap it only at an authorized repository site.

NOTE

As lot details of quality assurance, read the description in the section Limited Warranty carefully. Moreover, normal wear and change in product with no functional influence are not covered by the warranty. Also, be careful that, if the usage in the instruction manual is not observed as to the mixed gasoline, etc. described therein, it may not be covered by the warranty.

Page 19 Page 21
Page 20
Image 20
Zenoah EXZ2500S manual Fueling the Unit, For Your Engine LIFE, Avoid,  20 
Page 19 Page 21

EXZ2500S specifications

The Zenoah EXZ2500S stands out in the realm of outdoor power equipment, particularly known for its exceptional performance and reliability. Designed primarily for commercial and heavy-duty landscaping applications, this engine delivers a potent combination of power, efficiency, and durability, making it a preferred choice among professionals.

At the heart of the EXZ2500S is a high-performance, two-stroke engine. With a displacement of 25.4cc, this unit is engineered to produce robust power output while maintaining a lightweight profile. Weighing in at just around 5.5 kg, the engine allows for increased maneuverability, reducing fatigue during prolonged use. The two-stroke design is not just about power; it also facilitates a simpler maintenance routine compared to its four-stroke counterparts.

One of the standout features of the Zenoah EXZ2500S is its advanced ignition system, which ensures reliable starting in various conditions, even in cold weather. The CDI (Capacitor Discharge Ignition) technology contributes to improved fuel efficiency, allowing operators to get more work done while using less fuel. This is particularly beneficial for those who prioritize both performance and cost-saving in their operations.

The EXZ2500S is equipped with a durable fuel tank, providing an optimal capacity that minimizes the frequency of refueling. This characteristic is especially advantageous for commercial users who require extended runtimes during their work hours. Additionally, the system incorporates a fuel filter that ensures clean fuel delivery to the engine, promoting longevity and consistent performance.

Another noteworthy aspect of the Zenoah EXZ2500S is its ergonomic design. The handle is designed to reduce vibrations, contributing to user comfort and control, especially during extended periods of use. This feature not only enhances productivity but also ensures that operators maintain precision in their tasks, from trimming to cutting.

Lastly, the EXZ2500S is built with durability in mind. The materials used in its construction are resistant to wear and tear, making it suitable for rigorous applications. Whether you're tackling thick brush or performing detailed landscaping tasks, the Zenoah EXZ2500S resonates with reliability that professionals can depend on.

In conclusion, the Zenoah EXZ2500S combines power, efficiency, and comfort, making it an exceptional choice for outdoor professionals. With its innovative technology and robust features, it is poised to meet the demands of the most challenging landscaping jobs, ensuring that users can execute their tasks with confidence and precision.
Top Page Image Contents