9.Maintenance (EX-LRT only)

EX-LRT MA1

EX-LRT MA2

BLADES (MA1)

When refilling the tank or resting, it is often a good idea to use the time to oil the cutting blades.

If a gap exists between the upper and lower blades, follow the procedure below to adjust them so that they fit more closely together.

1.Loosen lock nut (A) as shown in the diagram.

2.Tighten screw (B) fully, and then turn one- third to one-half of a rotation backward.

3.While holding onto the screw to keep it in position, tighten the lock nut.

4.Check to make sure that the flat washer (C) is loose enough so that it may be turned by pressing on it with a finger.

(1)Upper blade

(2)Lower blade

NOTE

Screwing in the screw too tightly may make it impossible for the blades to move. Conversely, not screwing in the screw tightly enough may make the blades of the trimmer feel dull and cause leaves and branches to become caught in the blades of the trimmer.

QUICK TIP

If the blades become so worn down that it is no longer possible to eliminate the gap between them, you should contact the authorized RedMax servicing dealer from which you purchased your RedMax® trimmer to have the blades resharpened or replaced.

GEAR CASE

The reduction gears are lubricated by multipurpose, lithium-based grease in the gearcase.

Supply new grease every 25 hours of use or more often depending on the job condition.

When adding lubricant, use a grease gun to insert lubricant into the three grease nipples located on the gear case. (MA2)

(1) Grease fitting

39

Page 39
Image 39
Zenoah EXZ2500S manual EX-LRT MA1 EX-LRT MA2 Blades MA1, Upper blade Lower blade, Quick TIP, Gear Case, Grease fitting

EXZ2500S specifications

The Zenoah EXZ2500S stands out in the realm of outdoor power equipment, particularly known for its exceptional performance and reliability. Designed primarily for commercial and heavy-duty landscaping applications, this engine delivers a potent combination of power, efficiency, and durability, making it a preferred choice among professionals.

At the heart of the EXZ2500S is a high-performance, two-stroke engine. With a displacement of 25.4cc, this unit is engineered to produce robust power output while maintaining a lightweight profile. Weighing in at just around 5.5 kg, the engine allows for increased maneuverability, reducing fatigue during prolonged use. The two-stroke design is not just about power; it also facilitates a simpler maintenance routine compared to its four-stroke counterparts.

One of the standout features of the Zenoah EXZ2500S is its advanced ignition system, which ensures reliable starting in various conditions, even in cold weather. The CDI (Capacitor Discharge Ignition) technology contributes to improved fuel efficiency, allowing operators to get more work done while using less fuel. This is particularly beneficial for those who prioritize both performance and cost-saving in their operations.

The EXZ2500S is equipped with a durable fuel tank, providing an optimal capacity that minimizes the frequency of refueling. This characteristic is especially advantageous for commercial users who require extended runtimes during their work hours. Additionally, the system incorporates a fuel filter that ensures clean fuel delivery to the engine, promoting longevity and consistent performance.

Another noteworthy aspect of the Zenoah EXZ2500S is its ergonomic design. The handle is designed to reduce vibrations, contributing to user comfort and control, especially during extended periods of use. This feature not only enhances productivity but also ensures that operators maintain precision in their tasks, from trimming to cutting.

Lastly, the EXZ2500S is built with durability in mind. The materials used in its construction are resistant to wear and tear, making it suitable for rigorous applications. Whether you're tackling thick brush or performing detailed landscaping tasks, the Zenoah EXZ2500S resonates with reliability that professionals can depend on.

In conclusion, the Zenoah EXZ2500S combines power, efficiency, and comfort, making it an exceptional choice for outdoor professionals. With its innovative technology and robust features, it is poised to meet the demands of the most challenging landscaping jobs, ensuring that users can execute their tasks with confidence and precision.