Zenoah G2500TS manual Operation, OP1 OP2 OP3 OP4 OP5, Starting Engine, Fuel Chain oil, Switch

7. Operation

OP1

OP2

OP3

OP4

OP5

12 

■STARTING ENGINE

1.Feed fuel and chain oil into their respective tanks and tighten the caps securely. (OP1)

(1)Fuel

(2)Chain oil

2.Continuously push the priming bulb until fuel comes in the bulb. (OP2)

3. Put the switch to the "I" position. (OP3)

(1) Switch

4.Pull out the choke knob to the second-stage position. The choke will close and the throttle lever will then be set in the starting position. (OP4,5)

(1)Throttle lever

(2)Throttle interlock

(3)Choke knob

(a)when the engine is cool

(b)when the engine is warm up

(c)after the engine starts

NOTE

When restarting immediately after stopping the engine. Choke knob in the first-stage position (choke open and throttle lever in the starting position)