3. Symbols on the machine
For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make a mistake.
(a). The port to refuel the "MIX GASOLINE"
Position:
(b). The port to refuel the chain oil
Position:
(c). Flipping the switch to the "O" position, immediately the engine stops.
Position: Front at the top of the rear handle (near the switch)
(d). Starting the engine, if you pull out the choke knob (at the back- right of the rear handle) to the point of the arrow, you can set the starting mode as follows
•
•
Position:
(e). If you turn the rod by screwdriver follow the arrow to the "MAX" position, the chain oil flow more, and if you turn to the "MIN" position, less.
Position: Bottom of the power unit
(f). The screw under the "H" stamp is The
The screw under the "L" stamp is The
The screw at the left of the "T" stamp is the Idle adjustment screw.
Position: Left side of the rear handle
(g). It shows the directions that the chain brake is released (for the white arrow) and activated (for the black arrow).
Position: Front of the chain cover
IMPORTANT ENGINE INFORMATION
THIS ENGINE CONFORMS TO US EPA P H 1 F O R S M A L L O F F - R O A D E N G I N E S .
ENGINE FAMILY : YKZXS.0254DE:EM
ENGINE DISPLACEMENT : 25.4cc
REFER TO OWNER'S MANUMAL FOR MAINTE- NANCE SPECIFICATIONS AND ADJUSTMENTS.
MANUFACTURED :
RedMax Made in Japan
INFORMATION IMPORTANTE CONCERNANT LE MOTEUR
Ce moteur conformc aux normcs U.S. EPA PH1 pour les petits moteurs
Type de moteur : YKZXS.0254DE:EM
Cylindrée du moteur : 25.4cc
Se référer au Manuel de l'utilisateur pour les spécifications d'entretien et les réglages.
Manufacturé :
RedMax Made in Japan
5
