G3300 / G3300EZ

10. Specifications

Power unit:

 

 

 

Dry weight

 

Displacement (cm3):

31.8

Power unit only (kg):

 

Fuel:

Mixture (Gasoline 50 : Two-cycle oil 1)

G3300:

3.4

Fuel tank capacity (cm3):

.......................................

270

G3300EZ:

3.5

Chain oil:

 

Motor oil SAE# 10W-30

 

 

Oil tank capacity (cm3):

200

Cutting head:

 

Carburetor:

Diaphragm type (Walbro WT)

Guide bar

 

lgnition system:

 

Pointless (TCl)

Type:

Sprocket nose

Spark plug:

 

Champion RCJ-7Y

Size (in. (mm)):

14 (350)

Oil feeding system:

Automatic pump

Saw chain

 

Power

 

1.35/10,000 (kw/min-1)

Type:

Oregon 91VG

Max speed

 

12,500 (min-1)

Pitch (in. (mm)):

3/8 (9.53)

Idle speed

 

2,900 (min-1)

Gauge (in. (mm)):

0.05 (1.27)

Sprocket (Teeth x Pitch):

6T x 3/8

 

 

Dimensions (L x W x H) (mm):

380x230x250

Specifications are subject to change wihout notice.

Limited warranty

Should any failure occur on the product under normal operating conditions within the applicable warranty pe- riod, the failed part will be replaced or repaired free of charge by a KOMATSU ZENOAH authorized dealer.

WARRANTY PERIOD: 1 year (6 months if used profes- sionally, and 30 days if used for rental purpose) from the date of initial purchase.

THE PURCHASER SHALL BEAR COSTS OF TRANS- PORTING THE UNIT TO AND FROM THE KOMATSU ZENOAH DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DI- AGNOSTIC LABOR WHICH LEADS TO THE DETERMI- NATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAGNOSTIC WORK IS PERFORMED AT THE KOMATSU ZENOAH DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTE- NANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR IN- SPECTION TO THE EFFECT OF REPAIR OR “REPLACE AS NECESSARY” SHALL BE WARRANTED FOR THE WARRANTY PERIOD. ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMNET POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PERFORMANCE AND DULABILITY MAY BE USED IN NON-WARRANTY MAINTENANCE OR REPAIRS, AND

SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAIRURE OF A WARRANTED PARTS STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF INSTRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS ACCIDENT MISHANDLING, ALTERATION, ABUSE, IMPROPER LUBULICATION, USE OF ANY PARTS OR ACCESSARIES OTHER THAN THOSE SPECIFIED BY THE COMPANY, OR OTHER CAUSES BEYOND THE CONPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS REPLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MER- CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO TWO (2) YEARS OF HOME USE [ONE (1) YEAR FOR ANY OTHER USE] FROM THE ORIGINAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED.

IF YOU NEED TO OBTAIN MORE INFORMATION, PLEASE CALL YOUR NEAREST SERVICE CENTER, OR CHECK PLEASE KOMATSU ZENOAH WEB SITE http:// www.zenoah.net

GB-16

Page 16
Image 16
Zenoah G3300EZ owner manual Specifications, Limited warranty, Power unit, Cutting head