Zenoah G500AVS owner manual Specifications, Limited warranty, Power unit, Cutting head

G455AVS / G500AVS

10. Specifications

Power unit:
Displacement (cm3):
G455AVS				45.0
G500AVS				49.3
Fuel:	Mixture (Gasoline 50 : Two-cycle oil 1)
	(when using ZENOAH genuine oil)
Fuel tank capacity (cm3):			.......................................	550
Chain oil:				Motor oil SAE# 10W-30
Oil tank capacity (cm3):				260
Carburetor:			Diaphragm type (Walbro WT)
ignition system:				Pointless (CDl)
Spark plug:
G455AVS				Champion RCJ-7Y
G500AVS				Champion RCJ-6Y
Oil feeding system:		Automatic pump with adjuster
Sprocket (Teeth x Pitch):			............................	7T x 0.325″
Dimensions (L x W x H) (mm):				410 x 235 x 265
Dry weight
Power unit only (kg):
G455AVS				4.85
G500AVS				4.90

Limited warranty

Cutting head:
Guide bar
Type:	Sprocket nose
Size (in. (mm)):	14 (350), 16 (400), 18 (450)
Saw chain		G
Type:	Oregon 21BP
Pitch (in. (mm)):	0.325 (8.26)	B
Gauge (in. (mm)):	0.058 (1.27)
Power (kw/min-1)
G455AVS	2.06/9,000
G500AVS	2.51/10,000
Max speed (min-1)
G455AVS	12,000
G500AVS	13,000
Idle speed (min-1)
G455AVS	2,500
G500AVS	2,500

Specifications are subject to change without notice.

Should any failure occur on the product under normal operating conditions within the applicable warranty pe- riod, the failed part will be replaced or repaired free of charge by a ZENOAH authorized dealer.

WARRANTY PERIOD: 1 year (6 months if used profes- sionally, and 30 days if used for rental purpose) from the date of initial purchase.

THE PURCHASER SHALL BEAR COSTS OF TRANS- PORTING THE UNIT TO AND FROM THE ZENOAH DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DI- AGNOSTIC LABOR WHICH LEADS TO THE DETERMI- NATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAGNOSTIC WORK IS PERFORMED AT THE ZENOAH DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTE- NANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR IN- SPECTION TO THE EFFECT OF REPAIR OR “REPLACE AS NECESSARY” SHALL BE WARRANTED FOR THE WARRANTY PERIOD. ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMENT POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PERFORMANCE AND DULABILITY MAY BE USED IN NON-WARRANTY MAINTENANCE OR REPAIRS, AND

SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAIRURE OF A WARRANTED PARTS STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLI- GENCE OF INSTRUCTION LISTED IN THE OWNER/ OPERATOR MANUAL FOR PROPER USE AND MAIN- TENANCE OF THE UNITS ACCIDENT MISHANDLING, ALTERATION, ABUSE, IMPROPER LUBRICATION, USE OF ANY PARTS OR ACCESSARIES OTHER THAN THOSE SPECIFIED BY THE COMPANY, OR OTHER CAUSES BEYOND THE COMPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS REPLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MER- CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO TWO (2) YEARS OF HOME USE [ONE (1) YEAR FOR ANY OTHER USE] FROM THE ORIGINAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED.

IF YOU NEED TO OBTAIN MORE INFORMATION, PLEASE CALL YOUR NEAREST SERVICE CENTER, OR CHECK PLEASE ZENOAH WEB SITE http://www.zenoah.net

GB-15