•This saw is equipped with a chain brake that will stop the chain in the

event of kickback if operating prop- erly. You must check the chain brake operation before each usage by run- ning the saw at full the throttle for I - 2 seconds and pushing the front hand guard forward. The chain should stop immediately with the engine at full speed. If the chain is slow to stop or does not stop, re- place the brake band and clutch drum before use.

•It is extremely important that the chain brake be checked for proper operation before each use and that

the chain be sharp in order to main- tain the kickback safety level of this saw. Removal of the safety devices, inadequate maintenance, or incor- rect replacement of the bar or chain may increase the risk ot serious per- sonal injury due to kickback.

■FELLING A TREE

Felling direction

Notch cut

Felling cut

GZ3500T

A log lying on the ground

Saw down halfway, then roll the log over and cut from

G

the opposite side.

B

A log hanging off the ground

 

 

In area A, saw up from the bottom one-third and finish by sawing down from the top. In area B, saw down from the top one-third and finish by sawing up from the bot- tom.

Cutting the limbs of Fallen Tree

1.Decide the felling direction considering the wind, lean of the tree, location of heavy branches, ease of completing the task after felling and other factors.

2.While clearing the area around the tree, arrange a good foothold and retreat path.

3.Make a notch cut one-third of the way into the tree on the felling side.

4.Make a felling cut from the opposite side of the notch and at a level slightly higher than the bottom of the notch.

WARNING

When you fell a tree, be sure to warn neighboring work- ers of the danger.

Bucking and Limbing

WARNING

•Always ensure your foothold. Do not stand on the log.

•Be alert to the rolling over of a cut log. Especially when working on a slope, stand on the uphill side of the log.

•Follow the instructions in “For Safe Operation” to avoid kickback of the saw.

Before starting work, check the direction of bending force inside the log to be cut. Always finish cutting from the opposite side of the bending direction to prevent the guide bar from being caught in the cut.

First check to which side the limb is bent. Then make the initial cut from the bent side and finish by sawing from the opposite side.

WARNING

Be alert to the springing back of a cut limb.

Pruning of Standing Tree

Cut up from the bottom, finish down from the top.

WARNING

•Do not use an unstable foothold or ladder.

•Do not overreach.

•Do not cut above shoulder height.

•Always use both your hands to hold the saw.

GB-13

Page 12 Page 14
Page 13
Image 13
Zenoah GZ3500T owner manual Felling a Tree
Page 12 Page 14

GZ3500T specifications

The Zenoah GZ3500T is a powerful and versatile two-stroke engine designed for various outdoor applications, including gardening, landscaping, and industrial use. Known for its reliability and performance, the GZ3500T is particularly popular among professionals and enthusiasts who demand efficiency in their equipment.

One of the main features of the Zenoah GZ3500T is its displacement of 34.6 cc, which strikes a balance between power and weight. This engine delivers robust performance, producing approximately 1.5 kW (2.0 hp) of power, making it suitable for various tasks such as trimming, cutting, and pruning. The engine’s design emphasizes a high power-to-weight ratio, allowing operators to handle the equipment comfortably without exhausting themselves.

The GZ3500T incorporates advanced technologies that enhance its performance and efficiency. One notable innovation is the use of a double diaphragm carburetor that optimizes fuel delivery under different operating conditions. This feature ensures consistent acceleration and power output, improving overall fuel economy and reducing emissions. Additionally, the engine is equipped with a specially engineered exhaust system that minimizes noise while maximizing power, making it an environmentally friendly option.

Another characteristic of the Zenoah GZ3500T is its lightweight design. Weighing approximately 5.2 kg (11.5 lbs), this engine is easy to handle and maneuver during operation. It also features a user-friendly start mechanism, such as an easy starting system that reduces kickback, allowing for hassle-free ignition even in cold conditions.

Durability is a key aspect of the GZ3500T. The engine is constructed with high-quality materials that withstand the rigors of demanding environments. The use of a high-strength crankcase and reinforced components ensures longevity, making it a reliable choice for both casual users and professionals.

In conclusion, the Zenoah GZ3500T is an exceptional two-stroke engine that combines power, efficiency, and durability. With its innovative technologies, user-friendly features, and lightweight design, it stands out as an optimal solution for various outdoor applications. Whether you're a landscaper, gardener, or simply someone looking for a reliable engine for your tools, the GZ3500T offers the performance and reliability you need to get the job done efficiently and effectively.
Top Page Image Contents