English
6. Set up
SE1
(A)
(B)
■MOUNTING OTHER PARTS
1.Insert the driveshaft into the clutch drum, then attach the gearbox to the shaft tube as aligning the positioning holes and fasten the screw (A). Fasten the clamp bolt (B) firmly. (SE1)
(A)Screw
(B)Clamp bolt
(B)Tightning Torque: 52~69in-lbs (6~8N.m.)
SE2
2.Install the handle to the shaft tube and clamp at a position best for your job. (SE2)
18
