![](/images/new-backgrounds/1167434/16743411x1.webp)
PSZ2610
5. For safe operation
IMPORTANT
Remove any obstacle before beginning work.
4.Inspect the entire unit for loose fasteners and fuel leakage. Make sure that the cut- ting attachment is properly installed and securely fastened.
5.Always use the shoulder strap. Adjust the strap for comfort before starting the engine. The strap should be ad- justed so the left hand can comfort- ably hold the handlebar grip approxi- mately waist high.
STARTING THE ENGINE
1. Keep bystanders and animals at least
15 m away from the operating point. If you are approached, immediately stop the engine.
2. The product is equipped with a cen- trifugal clutch mechanism, so the cut- ting attachment begins to rotate as soon as the engine is started by put- ting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts.
WARNING
Never place the throttle into the high- speed position when starting the engine.
3.After starting the engine, check to make sure that the cutting attachment stops rotating when the throttle is moved fully back to its original posi- tion. If it continues to rotate even after the throttle has been moved fully back, turn off the engine and take the unit to your authorized ZENOAH servicing dealer for repair.
USING THE PRODUCT
IMPORTANT
Cut only materials recommended by the manufacturer. And use only for tasks ex- plained in the manual.
1. | Grip the handles firmly with both hands |
| using your whole hand. Place your feet |
| slightly apart (slightly further apart than |
| the width of your shoulders) so that your |
| weight is distributed evenly across both |
| legs, and always be sure to maintain a |
| steady, even posture while working. |
2. | Maintain the speed of the engine at |
| the level required to perform cutting |
| work, and never raise the speed of the |
| engine above the level necessary. |
3. | Never operate the pruner at an angle |
| greater than 60° in order to reduce the |
| risk of being struck by falling objects |
| during operation. |
4. | If the unit starts to shake or vibrate, |
| turn off the engine and check the |
|
whole unit. Do not use it until the trouble has been properly corrected.
5. Keep all parts of your body away from rotating cutting attachment and hot surfaces.
6. Never touch the muffler, spark plug, or other metallic parts of the engine while the engine is in operation or im- mediately after shutting down the en- gine. Doing so could result in serious burns or electrical shock.
WARNING
Approaching or contacting electric power lines with pruning saw may cause serious injury death from electrocution. Electric- ity can jump from one point to another by means arcing or may be conducted through damp branches. Maintain a clear- ance of at least 15m between pruning saw and any electrical line carrying live current.
•IF SOMEONE COMES
1.Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Be care- ful if you are approached. Injury may result from flying debris.
2.If someone calls out or otherwise in- terrupts you while working, always be sure to turn off the engine before turn-
ing around.
MAINTENANCE
1. In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular in- tervals.
2.Always be sure to turn off the engine before performing any maintenance or checking procedures.
WARNING
The metallic parts reach high temperatures immediately after stopping the engine.
3. When replacing the cutting attachment
or any other part, or when replacing the oil or any lubricant, always be sure
touse only ZENOAH products or prod- ucts which have been certified by ZENOAH for use with the ZENOAH product.
4.In the event that any part must be re- placed or any maintenance or repair work not described in this manual must be performed, please contact a representative from the store nearest ZENOAH authorized servicing dealer for assistance.
5.Do not use any accessory or attachment other than those bearing the ZENOAH mark and recommended for the unit.
6.Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product becoming damaged dur- ing operation or the product becom- ing unable to operate properly.