Manual For W-HANDLE Kit
1
Mount the handle to the shaft tube and clamp it at your best operating position.
|
| CONNECTING THROTTLE WIRE |
2 |
| |
| TO THE CARBURETOR | |
|
| |
|
|
|
1. Remove the air cleaner cover.
2.Connect the end of the throttle wire to the joint on the top of the carburetor.
ADJUSTING THROTTLE CABLE
•The normal play is 1 or 2mm when measured at the carburetor side end. Readjust with the cable adjuster as required.
.04 in |
|
(1~2mm) | Cable Adjuster |
|
3 CONNECTING SWITCH WIRES
•Connect the switch wires between the engine and the main unit. Pair the wires of the same color
Switch Wires
4 PUTTING ON WAIST PAD
•Wrap the waist pad around the shaft tube and the throttle wire.
Waist Pad
Band
