MOUNTING HEIGHTS |
| Hood | |
The range hood must be installed at a minimum |
| ||
eight of 24 inches (71cm) from the cooking |
| ||
surface. If a connecting duct work composed |
| Range | |
|
| ||
of two parts is used, the upper part must be |
|
| |
placed outside the lower part. Do not connect |
|
| |
he range hood duct to the same duct used to |
|
| |
exhaust hot air or fumes from another appliance. |
| the | |
Before proceeding with the assembly instructions | Min 24" - Max 36" | ||
remove the decorative mesh filters so that the | |||
| |||
range hood is esier to handle. |
| Mounting | |
the screws for mounting the hood. Make sure |
| ||
MOUNTING TO THE WALL |
|
| |
1. Place the paper template included with your | 36" |
| |
hood on the wall to determine where to add |
|
| |
the bottom of the template aligns with the |
| - | |
| Installation | ||
bottom of where the hood will be located. |
| ||
|
| ||
See Fig. 9 |
|
| |
2. Lift the hood onto the screws and |
|
| |
adjust to make sure the hood is |
|
| |
level. |
|
| |
3. When the hood has been adjusted |
|
| |
tighten the screws to secure the |
|
| |
hood in place. |
|
|
NOTE: Screws must be fastened into wooden studs so wood blocking may be necessary. If using wall anchors make sure to check your local codes for suitability and type of anchors to use.
NOTE1: For the various installations use screws and screw anchors suited to the
type of wall (minimum screw size: 1/4" diameter x
- 15 -