Zephyr ZRM-E36AS Maintenance - Cleaning and Installing Filters, Surface Maintenance, Hood Model

SURFACE MAINTENANCE:

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent , or steel wool/scouring pads which will scratch and damage surface.

For heavier soil use liquid degreaser.

After cleaning it is recommended that you use non-abrasive stainless steel polish/cleaners, to polish and buff out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain.

'RQRWXVHDQ\SURGXFWFRQWDLQLQJFKORULQHEOHDFK'RQRWXVH³RUDQJH´FOHDQHUV

Metal Filters

7KHPHWDO¿OWHUVLQVWDOOHGE\WKHIDFWRU\DUHLQWHQGHGWR¿OWHURXWUHVLGXHDQGJUHDVHIURPFRRNLQJ7KH\QHHG not be replaced on a regular basis but are required to be kept clean.

Filters should be cleaned after every 30 hours of use or once a month.

Remove and clean by hand or in dishwasher on low heat. Spray degreasing detergent and leave to soak if heavily soiled.

'U\¿OWHUVDQGUHLQVWDOOEHIRUHXVLQJKRRG

Replacing Metal Filters

6KRXOG¿OWHUVZHDURXWGXHWRDJHDQG

prolonged use, replace with following part number:

Hood Model:	Part No.	Qty. to Order.
ZRM-E36AS	50200018	2
ZRM-E42AS	50200018	3

5HSODFHDQ\GDPDJHG¿OWHUWKDWKDVSXQFWXUHG or broken mesh or damaged frame.

Metal Filter Dimensions:

15 3/4in. x 11in. 400mm x 279mm

Maintenance – Cleaning and Installing Filters

13