8
FEATURES & CONTROLS
TOUCH CONTROLS & FEATURES
1Blower On/Off
5Display (Speed level, Delay Off Indicator, Filter Clean/ Change)
4 Lights On/Off/ Hold to Dim
2 | Adjust 6 Speed Levels | 3 15 Min Delay Off |
|
|
1Blower On/Off
By pressing 
, the blower is switched On and Off. When switched on, the blower starts up on speed level 3.
2Speed Selection
The 6 speed levels are selected by pressing 
to decrease and 
to increase speed level. The display indicates level selected.
3Delay Off
This is used for programmed shut down of blower and lights 15 minutes after the function is
activated. Press 
once, a dot flashes in the lower right hand side of display 
indicating the function is on. The hood will completely shut down in 15 minutes.
4Lights On/Off/ Dim
Switch lights On and Off by pressing key | once. To dim lights, press and hold- | for 2 |
seconds. |
|
|
5Advance Display Functions
Filters Clean Reminder (Metal):
After every 30 hours of use, the display will start flashing an 
reminding you to clean the metal filters from residue and possible clogs.
The standard Metal Filters fitted are required to be cleaned frequently and as recommended in order to maintain blower efficiency. If improperly maintained, residue from cooking will sift through filters and cause damage to hood blowers and other sensitive components; and possibly clog duct work and creates fire hazard.
Filters Change Reminder (Carbon, if fitted):
When your hood is installed as a 'Purifying' (Ductless Recirculating) unit, it is fitted with a set of Carbon Filters to purify exhaust and fumes from cooking, and
